Screen Saver - Angelcare AC1120 Manual Del Propietário

5.5 - SCREEN SAVER

Allows you to set the screen saver starting point.
1
2
OFF/5/10/15/20 sec
MANUAL SETTING:
To trigger manually the screen saver mode push the Parent Unit Power button.
Do not push it for more than 2 seconds since this will shut down the Parent Unit.
TO REVERT BACK TO CAMERA CAPTION
(but do not hold down for more
than 2 seconds or unit will shut
5.6 - INFRARED NIGHT VISION
Allows you to capture image when lighting is unsufficient.
TO ACTIVATE NIGHT VISION:
Press the Night Vision icon to chose available modes:
The Moon icon will appear
when the infrared LEDS are ON.
OFF
3
ON
OK
Press the screen
OR
Push the ON/OFF
OFF)
AUTO: The infrared LEDS will turn on automatically
when the lighting is not sufficient. The image
transition takes 20 seconds
ON: The infrared LEDS are ON at all times.
OFF: The infrared LEDS are OFF at all times.
1) Press the Menu icon to access
main menu.
2) Press settings icon
to access sub-menu.
3) Press the Screen Saver icon to select
the delay before video mode turn
into screen saver mode.
4) Press OK to confirm.
NOTE:
Screen Saver icon will appear
when video is in Screen Saver mode.
There are 4 built-in infrared LEDs
on the Nursery Unit to enable clear
black and white image. The image
transition takes 20 seconds.
OR
Press Talk button
E
N
17