Screen Saver; Infrared Night Vision - Angelcare AC1120 Manual Del Propietário

5.5 - SCREEN SAvER

Allows you to set the screen saver starting point.
1
OFF/5/10/15/20 sec
MANUALLY SETTiNG:
To trigger manually the screen saver mode push the Parent Unit Power button.
Do not push it for more than 2 seconds since this will shut down the Parent Unit.
TO REvERT BACK TO CAMERA CAPTiON
(but do not hold down for more
than 2 seconds or unit will shut off)

5.6 - iNFRARED NiGhT viSiON

Allows you to capture image when lighting is unsufficient.
TO ACTivATE NiGhT viSiON:
Press the Night vision icon to chose available modes:
The Moon icon will appear
when the infrared LEDS are ON.
16
2
3
Press the screen
OR
Push the ON/OFF
1) Press Menu icon to access
main menu.
2) Press setting icon
to access sub-menu.
3) Press Screen Saver icon to select
the delay before video mode turn
into screen saver mode.
4) Press OK to confirm.
NOTE:
Screen Saver icon will appear
when video is in Screen Saver mode.
AUTO: The infrared LEDS will turn on automatically
when the lighting is not sufficient. The image
transition takes 20 seconds
ON: The infrared LEDS are ON at all times.
OFF: The infrared LEDS are OFF at all times.
There are 4 built-in infrared LEDs
on the Nursery Unit to enable clear
black and white image. The image
transition takes 20 seconds.
OR
Press talk button