Possible Misuse - Hilti WSJ 750 Manual Del Usuario

3 Description
3.1 Product overview
3.2 Intended use
The product described is a hand-held, electrically powered orbital-action jig saw. It is designed for cutting
plastic, wood and metal materials, drywall board and gypsum fiberboard.
The product has a dust removal connector for a dust removal system. The guard must be installed for
working with a dust removal system.
The tool may be operated only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3

Possible misuse

• Use of the product to cut off tree branches or to cut the trunk of a tree is not permissible.
• Use of the product to cut hazardous materials is not permissible.
• Use of the product in a damp or wet environment is not permissible.
3.4 Dust blower
The orbital-action jig saw has a dust blower.
The blower directs a jet of air toward the saw blade in order to keep the cutting line free of dust.
3.5 Stroke rate
The stroke rate can be adjusted by turning the thumbwheel. The range of adjustment is from position 1 (low)
to position 6 (high).
To determine the correct setting for the task to be performed, consult the information provided with the saw
blade.
3.6 4 orbital-action settings
The 4 orbital-action settings allow cutting performance and quality of cut to be adjusted to suit the material
to be cut. The orbital-action adjustment lever is used to set the power tool to one of the 4 settings.
The lower the orbital-action setting, the finer and cleaner the cut edges will be. The optimum setting can be
determined by carrying out practical tests.
Status
Position 0
18 English
1
On/off switch
@
Lockbutton (only WSJ 750/850-ET)
;
Air vents
=
Stroke rate regulator thumbwheel
%
Dust removal connector
&
Base plate
(
Lever for orbital action
)
Locking screw for base plate
+
Guide roller
§
Saw blade
/
Contact guard
:
Blade holder
∙
Saw blade release lever
$
Guard for dust extraction
£
Slider for base plate
|
Anti-splinter insert
¡
Meaning
No orbital action
377834
*377834*