Intended Use; Possible Misuse; Technical Data - Hilti WSC 85 Manual De Instrucciones

Cutting angle scale
=
Clamping screw for blade-angle adjustment
%
Clamping screw for rip fence
&
Cutting line indicator
(
Cutting depth scale
)
Pivoting guard
+
Rip fence (parallel guide)
§
Riving knife
/
Securing screws for riving knife
:
Switch-on interlock release button
∙

3.2 Intended use

The product described is a circular saw. It is designed for cutting wood or wood-like materials, plastics,
gypsum plasterboard, gypsum fiberboard and composite materials, up to a cutting depth of 85 mm (3.35 in).
The circular saw is equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard suction hoses. In order to connect the vacuum cleaner hose
to the saw, use of a suitable adapter may be necessary.

3.2.1 Possible misuse

The use of saw blades not in compliance with the given specification (e.g. diameter, speed of rotation,
thickness) or the use of cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not
permissible. Sawing metals is not permissible.

4 Technical data

4.1 Technical data
Power input
Power output
No-load speed
Speed under load
Cutting speed under no load
Cutting speed under load
Cutting depth at 0 °
Cutting depth at 45 °
Cutting depth at 60 °
Saw blade diameter
Saw blade arbor size
Riving knife thickness (standard)
Weight in accordance with EPTA procedure 01/2003
EN 60745 protection class
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually in use for a task. This may significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
14 English
Printed: 19.08.2016 | Doc-Nr: PUB / 5071332 / 000 / 03
Suction adapter
$
Clamping screw for rip fence
£
Lock for cutting depth
|
Base plate
¡
Drive-spindle lock button
Q
Air vents
W
Hexagon socket wrench
E
Auxiliary grip
R
Adjusting lever for cutting depth
T
WSC 85
1,800 W(220 - 240 V), 1,650 W(110 V)
1,260 W
4,500 /min
3,100 /min
54 m/s
37.3 m/s
0 mm ... 85 mm
0 mm ... 60 mm
0 mm ... 43 mm
(0 in ... 1.7 in)
207 mm ... 230 mm
30 mm
2 mm
7.8 kg
II