Sub-Zero ICB424 Instrucciones De Instalación página 5

M O D E L S I C B 4 2 4 A N D
A N T I - T I P B R AC K E T
To prevent the unit from tipping forward
and provide a stable installation, the unit
must be secured in place with the anti-tip
bracket.
An anti-tip bracket and hardware is provided
with the Wine Storage unit. The anti-tip
bracket must be installed on a solid base to
prevent tipover in case several loaded wine
shelves are extended at the same time.
M O D E L I C B 4 2 4
The anti-tip bracket should be attached to the
wall behind the unit with the bracket flange
located immediately above the top of the unit.
Refer to illustration 1 below.
A smaller metal 'countertop' bracket is also
provided with the Model ICB424, for installa-
tions that need to be modified to provide a
secure surface for attaching the bracket. This
bracket will secure the front of the unit to the
underside of the countertop, above the unit.
Refer to illustration 2.
Anti-Tip
Bracket
6 mm
Illus. 1
I C B 4 2 4 F S I N S TA L L AT I O N
I N S TA L L AT I O N
Countertop
Bracket
Illus. 2
M O D E L I C B 4 2 4 F S
If you are installing the Model ICB424FS in a
space deeper than 625 mm, the anti-tip bracket
must be installed no more than 625 mm deep,
so it engages the unit properly. It is important
that this measurement be made from the front
surface of the door, to the back of the anti-tip
bracket. Refer to illustration 3 below.
Anti-Tip Bracket
Illus. 3
M O D E L S
I C B 4 2 4
I C B 4 2 4 F S
5