Warning; Introduction; Technical Details - Sagola ATLANTA 800 G Manual De Instrucciones

Before starting the unit you must read, take into considera-
tion and comply with all the indications described in this
Manual.
This manual must be kept in a safe place, accessible to all
users of the unit.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed only
for the purpose for which it was designed.
This unit belongs to the family of devices designed to spray
products with high pressure which is used for the airless
spraying (airless) various coating materials, operated by
means of a spray gun. They provide a high level of product
transfer and excellent quality finish, as well as low levels of
contamination.
The equipment consists of the following standard features:
- Pump model ATLANTA 800 G
Unit featuring a combustion engine that activates the
hydraulic device which provides the pressure necessary to
spray the product.
Petrol engine
Cubic capacity
Diameter x stroke
Motor power
Maximum torque
Fuel consumption
Cooling system
Ignition system
Shaft turning direction
Motor housing oil capacity
Motor reducing gear capacity
Fuel tank capacity
Pump housing oil
Pump housing capacity
Adjustable pressure
Air flow
Product inlet
Product outlet
Maximum recommended cap pitch
Maximum cap pitch with two guns
Gross weight
Dimensions
Approvals

1. WARNING

Likewise, accident prevention standards, work centre
regulations and directives and current legislation and
restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA
products mentioned in this manual are registered trademar-
ks or brand names of the company SAGOLA S.A.

2. INTRODUCTION

- Instruction manual
- Case
As optional and complementary elements of the equipment,
in this Manual the following are included:
- Product hoses
- Airless Gun
- Spray air caps:

3. TECHNICAL DETAILS

The unit is supplied with a suction probe, which is inserted
directly in the container of the product to be applied.
- 18 -
- Road marking Kit
- Fixed tips
- Swivel caps (Self-cleaning).
ATLANTA 800 G
HONDA GX 160, 4 stroke, 1 cyl.
163 cm 3
68x45 mm.
4,000 watts / 4,000 r.p.m.
1.1 Kgm / 2,500 r.p.m.
230 g/psh
Forced air
Transistorised magneto
Anticlockwise
0.60 liters type SAE 10W-30
0.50 liters type SAE 10W-30
3.6 liters
RENOLIN MR-10
Min. 2 L - Max. 2.4 L
0 - 220 bar
8 L/min. (water viscosity)
Metric thread 36 X 2 male
Thread GAS 1/4 BSP male
0.036"
0.026"
76 Kg
1,100 x 750 x 900 mm