Vollrath VBBC1-37-A Manual Del Usuario página 8

ASSEMBLE THE MACHINE
NOTICE: The United States Department of Agriculture and the Food
and Drug Administration require that lubricants used on
food processing equipment be certified for this use. Use
lubricants only in accordance with the manufacturer's
instructions.
NOTICE: Clean, sanitize and allow all parts to air dry before
assembling.
1. Make sure the machine is unplugged.
2. Attach the gasket.
NOTICE: The wide rim of the gasket must be placed facing down.
3. Attach the bowl.
2
Click
4. For bowls with a removable impeller, lubricate the washer on the
underside of the impeller with a food-grade lubricant.
5. Insert the beverage circulating component(s).
8
1
6. Install the washer onto the spigot. The flanges must be on the
outside of the washer when it is installed.
Flanges
7. Attach the dispensing handle. Then while pressing the handle, slide
the spigot into position in the bowl.
8. Slide the drip tray into the base until you hear it click into place.
9. Place the cover on the bowl.
Refrigerated Beverage Dispensers Operator's Manual
Click