Mechanical Installation - ABB EuroFlex MN1926WEN Guía De Instalación Rápida

4 Quick Installation Guide – EuroFlex

Mechanical installation

The EuroFlex is designed to be mounted in a IEC297 / DIN41494 rack with card
frames and guides to support the card. The card dimensions are 160 mm x 100 mm.
When mounted as specified, the EuroFlex requires at least 50 mm (2 in / 10 hole
pitch (HP) units) of rack width to accommodate the components and to allow
adequate air flow.
The optional backplane BPL011-501 is recommended. This requires a rack width of
100 mm (4 in / 20 HP units).
CAUTION! To prevent equipment damage, ensure that all power sources
have been removed from the backplane before attaching the EuroFlex.
50 mm
(10HP)
100 mm
(20HP)
Backplane
HP = Hole Pitch