Cycle Start; Start Of A Cycle And Setting Of Delayed Start; Fast Advancement Function - Pixsys ATR 902 Manual Instalador

Cycle start

8

Start of a cycle and setting of delayed start

8.1
Red display visualizes
Press
Red display visualizes the cycle
1
CYCLE
selection.
Cycle starts. Buzzer sounds
briefl y. Green display shows the
2 process while red display shows
START
STOP
the setpoint introduced on
parameter 14
If delayed start is active (see parameter 15
Press
Red display visualizes
3
Green display shows (fl ashing)
START
STOP
the programmed waiting time.
Increases or decreases the initial
4
waiting time (hour:minutes).
Waiting starts.
5 When the programmed time
START
STOP
expires, cycle will start.

Fast advancement function

8.2
During functioning or after a restart it can be useful to move onwards or
backwards the cycle in progress, to reach chosen setpoint value.
Press
Forwards or backwards (each
1 beep of internal buzzer means
START
STOP
one minute).
18 ATR902 - User manual

.
Display

Display

Display
Press CYCLE to scroll the cycles

( for cycle no. 2 -
cycle no. 15) until visualize the
chosen cycle.
NB: only cycles already
programmed can start.

) proceed as follows:
Press or
time.
To end the cycle and
controller before the normal
conclusion, press
Do
  
for
Do
to modify the
Do

the
for a 1".
START
STOP