Specifi C Installations; Gate Section Limit Stops On The Ground; Electrical Connections - SOMFY Ixengo S Manual De Instalación

Specifi c installations
Installation with a niche
in a fence

Gate section limit stops on the ground

Check for the presence of the gate section limit stops H on the ground.
For the motor drive unit to operate correctly, using limit stops on the ground is required for both the opening and closing
directions.

Electrical connections

Make the connections between the motor drive unit and the FX24 electronic controller for Ixengo S 24 V and FX 230
electronic controller for Ixengo S 230
Copyright © 2008 Somfy SAS. All rights reserved.
Moving the gate
hinge
V.
Installation with a niche
in a gate post
7