Using The Memory Function - Omron Gentle Temp 522 PRO Manual De Instrucciones

3. Using the Unit
3.2

Using the Memory Function

The unit automatically stores the previously measured value.
1.
Press the ON/MEM button to turn on the unit.
2.
Press the ON/MEM button again.
The memory number appears on the display.
3.
Release the ON/MEM button.
The previously measured value appears on the display.
Note: If there is no measurement record in this unit, the lower right screen will be
displayed.
4.
Press and hold the ON/MEM button until "OFF" appears on the display to
turn off the unit.
The unit also turns off automatically if no operation is performed for 30 seconds.
12