Troubleshooting And Maintenance; The Icons And Error Messages - Omron Gentle Temp 522 PRO Manual De Instrucciones

4. Troubleshooting and Maintenance

4.1

The Icons and Error Messages

Error Display
Unit stabilization in process.
Battery is low.
Probe cover is not attached correctly.
Measurement before unit stabilization.
The unit is showing a rapid ambient
temperature change.
The ambient temperature is not within the
range between 10°C to 40°C (50°F to
104°F).
Errors 5–9 indicate a malfunction of the unit.
Cause Remedy
Wait until stops flashing.
Replace the battery.
(Refer to section 4.3)
Attach the probe cover again until
Wait until stops flashing.
Allow the unit to rest in a room for at least 30 minutes
at room temperature: 10°C to 40°C (50°F to 104°F).
Allow the unit to rest in a room for at least 30 minutes
at room temperature: 10°C to 40°C (50°F to 104°F).
Remove the battery, wait for 1 minute, reinsert the
battery, and turn on the unit again. If the message
reappears, please contact the OMRON retail outlet or
distributor for having the unit checked.
EN
stops flashing.
13