Expanding The Side Shelves; Unfolding The Wind Shield; Assembling The Side Shelf Handles; Placing The Grease Cup - Louisiana Grills LG4BGGC1 Armado Y Operación

8. EXPANDING THE SIDE SHELVES

Installation:
• Locate the side shelf support bar on each side of the firebox. Lift the
side shelf support bar, then press it down to secure. Note 8A.
• Unfold the left and right shelves to rest on each side shelf support bar.
Note position in illustration 8B.

9. UNFOLDING THE WIND SHIELD

Installation:
• Lift the wind shield upright from the center of the fire box, and expand
the wind shield side wings.
• Place the tabs of the wind shield side wings into the small tab openings
near the front two corner of the firebox.

10. ASSEMBLING THE SIDE SHELF HANDLES

Parts Required:
2 x Side Shelf Handles (#9)
4 x Screw (#B)
Installation:
• Assemble a side shelf handle to the front of the left side shelf, securing
with two screws, from the inside. Repeat for right side shelf.

11. PLACING THE GREASE CUP

Parts Required:
1 x Grease Cup (#8)
Installation:
• On the back of the grill, place the grease cup on the bottom of the
firebox, as shown in the illustration.
8A
8B
9
10
11
9