Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
- Open the brakes for easier fitting/dismantling of the wheel (if the tyre is bigger
than the space between brake shoes).
- To recover the wear on the shoes in order to keep the brake handles constant.
The end caps (32) are marked so that the previous adjustment is easy to restore.
Dismantling / Maintenance :
The tensioners can be removed for maintenance.
- Extract the tensioner end caps (32) by pulling them off manually.
- Unscrew the threaded stops (23 and 24) by hand, using a 3mm Allen key. This
will extract the guide ring (4).
- Clean and grease the inside of the knobs (21 and 22) and refit the threaded
caps (23 and 24).
- Change the guide rings.
- Clip on new tensioner casing caps (32) by pressing inside them with a non-
spherical end 4mm Allen key.
35
Publicidad
Tabla de contenido
