Introduction To Assembly; Tools Needed - Huffy HCoaster Serie Manual Del Propietário

Introduction to Assembly

This Owner's Manual is made for several diff erent bicycles:
• Some illustrations may vary slightly from the actual product.
• Follow instructions completely.
• If the bicycle has any parts that are not described in this manual, look for separate "Special
Instructions" that are supplied with the bicycle.
• Models may have diff erent accessory items such as bags, baskets, refl ectors, cup holders,
racks, etc.
• All features, components and accessories are not included on all models.
• Use the Index page to locate specifi c sections of this manual.
• Please read through this entire manual before beginning assembly or maintenance.
• If you are not confi dent with assembling this unit, refer to a local bike shop.
WARNING
: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider
while seated on the bicycle.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle.
This can prevent accidentally discarding parts of the bicycle.
Tools Needed (not included)
Adjustable Wrench
Flat-blade Screwdriver
Slip-Joint Pliers
Additional tools may be supplied. Styles may vary
8
Open-end Wrenches
Phillips Screwdriver
Metric Allen Wrenches
Sonnette et accessoires du guidon (divers modèles)
Étapes :
A
• Si la vis de montage est installée en
usine, la retirer et la mettre de côté.
B
• Ouvrir le collier d'accessoire suffi sam-
ment pour qu'il puisse être inséré dans le
guidon.
• Positionner l'accessoire de manière à ce
qu'il soit bien aligné et fi xé tel qu'illustré.
• Serrer la vis fermement. Ne pas serrer
outre mesure. Cela pourrait endom-
mager le collier.
B
A
25