Operation; Switching The Instrument On; Setting The Stirring Speed; Cleaning And Maintenance - Heidolph MR Hei-Mix L Instrucciones De Empleo

4

Switching the instrument on

Caution:
Stirring will begin immediately after the instrument is switched on in
accordance with the setting of control knob (B).
Agitator will begin turning immediately!
Danger of splashing.
Before switching the unit on, turn control knob (B) fully to the left.
Turn on the
instrument's power
using the rocker switch
(A) on the right side of
the housing. The green
Power LED (G) on the
front panel will light.
5

Setting the stirring speed

Set the desi red speed with the control knob (B) according to the scale.
The motor will start w
Use a cloth dampened with mild soapy water to clean the housing and the surface of the
instrument.
Note
Do not use chlorine bleach or other chlorine-based cleaning products,
abrasive cleanser, ammonia, steel wool or cleaning products with
metallic components under any circumstances. These will damage the
finish of the instrument.
The instrument is maintenance-free. Should repairs become necessary, please contact
an authorised Heidolph Instruments repair technician. Please contact your Heidolph

OPERATION

hen the speed is set to 100 rpm or higher.

CLEANING AND MAINTENANCE

17
E