Calibrating The Compass - SportDOG TEK Serie Guia De Inicio Rapido

STEP :: 03

CALIBRATING THE COMPASS

Note: Always calibrate the compass outdoors. Hold the compass level and away from objects
that may generate magnetic fields, such as cars or buildings.
1. From the main menu, select COMPASS > CALIBRATE. The COMPASS screen appears.
2. Rotate the Handheld Device 2-3 times in all three dimensions as shown below. Rotate
until the black indicators are as close as possible to the center of the green zone. If
successful, your Handheld Device will beep and vibrate as well as display a message that
says "CALIBRATION DATA HAS BEEN UPDATED SUCCESSFULLY".
Note: if you are unable to get the compass to automatically update your calibration data,
follow the remaining steps.
3. Rotate until the black indicators are as close as possible to the green zone and press the
Menu Selection Pad to continue.
4. At the prompt "DO YOU WANT TO SAVE THE NEW CALIBRATION DATA?" press the arrow
keys to select yES.
5. Press BACK (top-right button on the Handheld Device) to return to the main menu.
Note: To set your magnetic declination angle to avoid inaccurate compass readings, refer to your
operating Guide.
STEP :: 04
PAIRING THE GPS COLLAR TO THE HANDHELD DEvICE
Your system will already be paired when you get it, but in the event you need to pair the
Handheld Device to the GPS Collar, follow the steps outlined in STEP 3 of your Operating Guide.
6 www.sportdog.com