Components; How The System Works - SportDOG NoBark 10R Manual De Funcionamiento

cOMpONeNts

hOW the sYsteM WORKs

the sportdog® nobark™ 10r collar uses several features designed to shorten the training
phase and promote good behavior:
• a patented sensor system provides the most reliable bark detection available. the unit
delivers a static correction via the contact points only if it detects both vibration from the
vocal cords and the sound of the bark.
• three user-selectable modes allow you to choose how corrections are delivered:
1. the patent pending temperament learning mode tracks the number of corrections
needed to substantially reduce (and in most cases eliminate) the number of nuisance barks.
the system provides 10 levels of static correction. it begins with a low-level correction
(level 0). however, if excessive barking continues, the correction intensity will increase with
each successive bark until the barking stops. this correction level becomes the starting
level the next time the dog barks. once the dog has learned to reduce the barking, the initial
warning corrections are reduced.
2. in progressive correction mode, the correction starts at the lowest level and progresses
to the next level (to a maximum of level 9) each time your dog barks within 30 seconds of
the previous bark. if your dog does not bark again within 30 seconds, the correction will be
reset to the lowest level (level 0).
3. in the user-selected correction mode, the user presets the correction level (0-9) that
will be used every time the dog barks.
Note: As a built-in safety feature, if your dog barks 15 times or more within an 80 second period,
the NoBark™ 10R will automatically shut off for 3 minutes. This safety feature is active in all three
modes of operation.
important:
before playing with your dog, remove the nobark™ 10r. the activity may cause your dog to
bark, which could lead to him associating the play with the correction.
All manuals and user guides at all-guides.com
WWW.spORtdOg.cOM 5