[
To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
Remaining
charge
indicator
Status
Sufficient
power
remaining
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
the remaining charge indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 14).
[
To remove the battery pack/"Memory Stick Duo"
Open the battery/"Memory Stick Duo" cover.
"Memory Stick Duo"
Make sure that the access lamp is not lit,
then push the "Memory Stick Duo" in once.
• Never remove the battery pack/"Memory Stick Duo" when the access lamp is lit. This may cause damage
to data in the "Memory Stick Duo"/internal memory.
Battery
Battery half
almost fully
full
charged
Battery pack
Slide the battery eject lever.
Be sure not to drop the battery pack.
Battery low,
Change the battery
recording/
with fully charged
playback
one, or charge the
will stop
battery. (The warning
soon.
indicator flashes.)
60 Min) is also shown after
GB
13