Peavey XR696 Guía De Operación página 13

Input Specifications:
Function Input Z
(Ohms)
Lo-Z
(150 Ohms)
Channels 1-8
Hi-Z
Channels 1-4
Line Input
Channels 5-8
Tape 20 k
Channel 9
0 dBV=1V (RMS) open load or 0 dBVu = .775 V (RMS)
** Min input level (sensitivity) is the smallest signal that will produce nominal output (2 dBu) with channel and master
level controls set for maximum gain.
* Nominal settings are defined as all controls set a 0 dB (or 50% rotation for rotary pots)
XR 696 Output Specifications:
Function Minimum Load Z
(Ohms)
Main L/R 600
Monitor 600
Tape 10 k
+2 dBu = 0 dBV = 1V (RMS)
Gain:
Mic Input to L and R Output
Hi-Z Input to L and R Output
Line Input to L and R Output
SPECIFICATIONS
Input Gains
Control
Min Setting
2 k Max w/o pad
(50 dB)
Max. w/ pad
(25 dB)
100 k Max w/o pad
(50 dB)
Max w/ pad
(25 dB)
22 k Max. w/o pad
(30 dB)
Max. w/ pad
(5 dB)
Max. Gain
(30 dB)
Output Level
Nominal
+2 dBu
+2 dBu
-10 dBu
XR 696
®
:
Input Levels
Min** Nominal*
-60 dBu -30 dBu
-35 dBu -5 dBu
-60 dBu -30 dBu
-35 dBu -5 dBu
-28 dBu +2 dBu
-3 dBu +27 dBu
-28 dBu +2 dBu
Bal./Unbal.
Max.
+21 dbu Unbal.
+21 dBu Unbal.
+10 dBu Unbal.
60 dB (Max. Gain)
60 dB (Max. Gain)
30 dB (Max. Gain)
13
Bal/ Connector
Max Unbal.
-11 dBu Bal. XLR: Pin 1 Gnd,
Pin 2 (+), Pin 3 (-)
+13.5 dBu
-12 dBu Bal. 1/4" TRS: Tip (+),
Ring (-),
Sleeve Ground
+12.5 dBu
+21 dBu Unbal. 1/4" TRS: Tip (+),
Ring (-),
+46 dBu Sleeve Ground
+21 dBu Unbal. RCA Jacks
Connector
1/4" Phono Tip (+),
Sleeve Ground
1/4" Phono Tip (+),
Sleeve Ground
RCA