Wiring Schematic - Thetford Tecma EasyFit Premium Plus Manual Del Propietário

Installation, con't.

Wiring Schematic

Refer to Fig. H for references.
Ref. Description
A.5 Bezel / Wall Switch
A.6 Controller
A.7 Waste Tank Sensors:
A7.1 = Full Tank Sensor
A7.2 = Mid Tank Sensor
Macerator Pump
A.8
12V DC Power Source
C.2
Waste Holding Tank
C.6
K.1 Pump Connection -
Fresh Water Solenoid 12V or 24V
K.2 Wire Harness Kit to extend wire
length (Optional)
Tecma EasyFit Premium Plus RV Owner's & Installation Manual
A.8
C.2
K.2
Water Pumps must be powered by toilet controller as shown above. Do not
AVISO AVIS
! ! ! ! NOTICE ATTENTION CAUTION ATENCIÓN DANGER
wire macerator pump directly to a power source so that it is controlled by its
ATTENTION ATTENTION ATTENTION
pressure-activated switch.
A.6
Fig. H
7
A.5
K.1
J.7
A.7
C.6
A7.1
A7.2
T000037C
T000037A
98229 Rev. A (07.28.17)