Functional Description - Abicor Binzel ABIDRIVE V2 Instructivo De Servicio

5 Functional description

4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging
Tab. 8
NOTICE
• The ABIDRIVE V2 must be transported and operated in an upright position only.
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-6
5 Functional description
1
1 ABIDRIVE V2 – front
2 TIG welding torch with wire feed
Fig. 3 System overview
The ABIDRIVE V2 is part of a welding system. The wire required for TIG welding is delivered through the
cable assembly and to the manual welding torch (2).
The wire is fed constantly to the TIG arc via a four-roll drive. The TIG arc is produced by an ABITIG manual
welding torch (2) and a power source (3).
The components needed for welding, such as welding current, shielding gas and coolant, are connected to
the ABIDRIVE V2 (1) as required. The required welding wire depends on the material to be welded and
is taken from the integrated wire spool.
EN - 8
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
material. If you have any questions concerning the packaging and/or how to
secure an item during shipment, please consult your supplier.
Transport
2
3 Power source
4 Gas connection
5 ABIDRIVE V2 – back
3
4
10
8
9
6 Wire spool seat
7 Intermediate cable assembly
8 Coolant return (red)
TIG cold-wire feeder
5 6
7
9 Cooling unit
10 Coolant supply (blue)