Risk Of Crushing; Risk Of Injury - Abicor Binzel ABIDRIVE V2 Instructivo De Servicio

TIG cold-wire feeder
6.9 Feeding in the wire

Risk of crushing

Hands can be pulled in and crushed by moving wheels.
• Do not reach into moving wheels.

Risk of injury

Physical injury caused by the start of the wire.
• Keep cold-wire feed at the torch head away from the body.
1
2
3
Fig. 16
1 Open the cover on the ABIDRIVE V2.
2 Fold both of the pressure levers (1) forwards and open the pressure rolls (2).
3 Untie the start of the wire from the wire spool and deburr it at the front end.
4 Insert the wire through the liner (5) over the drive rolls (4) into the central socket (3).
5 Close the pressure rolls (2) and fold the pressure levers (1) back into the vertical position.
6 Feed the wire through the cable assembly by pressing either the wire feed button on the front control
panel or the torch trigger.
WARNING
CAUTION
1
5
Pressure lever
2 pressure rolls
Central socket
Feeding in the wire
6 Putting into operation
2
1
4
4 2 drive rolls
5
Liner
3
EN - 23