Product Description; Designated Use En; Usage Not In Accordance With The Intended Purpose En; Technical Data En - Abicor Binzel ABIDRIVE CW Manual Del Usuario

2 Product Description

2 Product Description
2.1 Designated use
The ABIDRIVE CW has been designed for delivering welding filler materials in TIG welding processes. Any
use beyond that is prohibited. Designated use also includes the observance of the prescribed operating,
maintenance and servicing instructions.
2.2 Usage not in accordance with the intended purpose
Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorised conversions or power increase modifications are not allowed.
2.3 Technical Data
1
2
3
Fig. 1
The ABIDRIVE CW is part of a welding system. The wire required for TIG welding is delivered through the
cable assembly (8) and to the manual welding torch (1) .
The wire is fed constantly to the TIG arc via a four-roll drive. The TIG arc is produced by an ABITIG manual
welding torch (1) and an inverter power source (5).
The components required for welding, such as welding current, shielding gas and coolant, are connected to
the ABIDRIVE CW (2) as required. The required welding wire depends on the material to welded and is
taken from the integrated wire spool.
Ambient temperature
Transport and storage
Relative humidity
Tab. 1
Wire feeding unit
Power supply
Wire feeding unit
Power supply
Tab. 2
EN - 4
1
LORCH
8
7
Hand-held welding torch
ABIDRIVE CW
Power supply ABIDRIVE CW
System overview
Ambient conditions
Weight, dimensions
2
6
Shielding gas cylinder Intermediate cable assembly
4 7
Inverter power source Cable assembly
5 8
Coolant recirculator
6
- 10 °C to + 40°C
- 25 °C to + 55 °C
up to 90 % at 20 °C
approx. 19 kg
approx. 7.5 kg

approx. 580 mm

approx. 185 mm
TIG cold wire feeder
3
4
5

280 mm 380 mm

200 mm 175 mm