After Use - Rowenta Steamforce DW 9240 Instructivo De Operación

Ocultar thumbs Ver también para Steamforce DW 9240:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6 • Vertical burst of steam
7 • Spray
8 • Anti-Drip system *
• This prevents water escaping from the soleplate when the temperature is too low.
9 • Auto Off function*

AFTER USE

10 • Emptying
11 • Storing
(from temperature setting (••) upwards)
• Hold the iron vertically and press the burst of steam button to remove creases
from suits, jackets, skirts, hanging curtains etc.
IMPORTANT Never direct the steam at persons or animals!
TIP Hold the iron 4 to 8 inches away from the garment to avoid
burning delicate fabrics.
• Press the spray button to dampen fabrics
and iron out tough creases.
• For your safety, the electronic system cuts off the power and the auto
off indicator light flashes if:
- The iron remains motionless for more than 8 minutes on its heel.
- The iron remains flat or on its side for more than 30 seconds.
- To restart the iron, just move it gently until the auto-off indicator
light stops flashing.
• Allow the appliance to cool down before storing the iron standing on its
heel.
IMPORTANT Do not wind the cord around the hot soleplate.
• Unplug the iron.
• Pour away remaining water.
• Set the temperature control
dial on position Min.
7
* depending on model

Publicidad

Tabla de contenido
loading

Tabla de contenido