Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE NEEDED
22. Attach Corner Protectors to Table Top using Screw (#5) as shown in Detail N1 & N2.
5
#8 X 9/16 Screw
(Qty. 6)
NOTE: Prepare an area for the assembly of the second table top half. If necessary, move the first table
top half aside with the aid of a helper. Be sure to place it in a location where it won't be disturbed or
damaged. If setting on its side, be sure to place the bottom edge no less than 12 inches away from the
5
wall. Also be sure to place carpet or pieces of the shipping carton down to protect table top edges. If
floor is not carpeted, brace table top half with a heavy object to keep it from sliding.
40
23. Repeat steps 5-22 to complete second Table Top Assembly.
Detail N2
Figure
12
40
Detail N1
16
Publicidad
Tabla de contenido
