Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL CHARACTERISTICS.
3.
3.1. DESCRIPTION.
The CDP dehumidifier (dehumidifying unit for swimming pools) is used in facilities requiring
humidity control and individualised temperature management, taking advantage of the existing
heat vapours and the equipment's heat output in order to warm the ambient air in small swimming
pools, bathtubs, dressing rooms and bathrooms.
3.2. DESCRIPTION OF THE EQUIPMENT.
Wall-mounted monoblock dehumidifying pump constructed of robust and lightweight thermal-
moulded ABS plastic, resistant to solar radiation. The colour does not fade, and it has a reduced
size and is very lightweight. Equipped with the following:
◙ Monoblock evaporating and condensing coil constructed of copper tubing including
tempered aluminium fins (special for corrosive surroundings)
◙ Hermetically sealed compressor including internal protection, positive temperature
coefficient device and silencer.
◙ A cooling circuit made of heavy wall copper tubing, processed to repel rust.
◙ Centrifugal fan with various flow levels.
◙ Freon refrigerant gas R407C which is not harmful for the ozone (Ecological).
◙ Condensation plenum chamber made of thermal-moulded ABS plastic.
◙ Wall-mounted unit with legs or wheel mounting option.
◙ Expansion valve with pressure equaliser.
Control:
◙ Full control of humidity and complete visualisation of all parameters.
◙ Mini pressure switches with automatic reset.
◙ Defrosting thermostat.
◙ Optional: time control card.
Assembly and Maintenance:
◙ Quick and easy set-up and parts easily accessible for maintenance.
◙ External outlets for fitting and charging pressure gauges.
◙ Easy filter and machine cleaning.
Options:
◙ Electrical battery with built-in regulation and atmospheric thermostat.
◙ A.C. battery with built-in three-way valve and atmospheric thermostat.
◙ Legs or wheels.
3.3. ELECTRICAL PANEL.
Electrical control panel for complete process control and to guarantee optimum
performance with minimum power consumption at all times. The process control is based on
various elements which are used to maintain temperature conditions and humidity in the air of a
covered facility.
ENGLISH
28
Publicidad
Tabla de contenido
