ROBBE Power Peak QUAD EQ-BID Manual Del Usaurio página 37

SELEcTING A MEMORy LOcATION
SELEcTING ThE TyPE Of BATTERy
LiPo, LiIo, LiFe or Pb (lead-acid) using the '+' or '-' button. Press the 'ENTER' button again
to confirm your selection.
ken.
SETTING UP NUMBER Of cELLS/BATTERy VOLTAGE
can now select a cell count for NiCd and NiMH batteries within the range 1 to 14 using the
'+' or '-' button. Press the 'ENTER' button again to confirm your selection.
With the battery types LiPo, LiIo, LiFe and Pb (lead-acid) you should enter the nominal
battery voltage instead of the cell count.
Example: Press the '+/ - ' button to leaf through the screen display until the arrow indicates
LiPo
Cell count Battery voltage
1 3,7 Volt
2 7.4 Volt
11,1 Volt11,1
3
Volt
4 14,8 Volt
5 18,5 Volt
6 22,2 Volt
Operating Instructions
Power Peak ® Quad EQ-BID
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Memory. Press the
'ENTER' button and the '+ / -' symbol flashes. You
can now select a memory within the range 0 to 9
using the '+' or '-' button. Press the 'ENTER' button
again to confirm your selection.
Press the '+/ - ' button to leaf through the screen
display until the arrow indicates Memory. Press the
'ENTER' button and the '+ / -' symbol flashes. You
can now select a battery type from NiCd, NiMH,
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Cell Count. Press the
'ENTER' button and the '+ / -' symbol flashes. You
Battery Voltage. Press the "ENTER but-
ton, the '+ / -' -symbols flash. For a LiPo battery,
the battery voltage can be selected in 3.7 V per
cell increments. Press the 'ENTER' button again to
confirm your selection.
The following voltages are available to use for
lithium batteries:
Cell count Battery voltage
1
2
3
4
5
6
LiIo
3,6 Volt
7,2 Volt
10,8 Volt
14,4 Volt
18,0 Volt
21,6 Volt
13
Order No.
8565
Life
Cell count Battery voltage
1 3,3 Volt
2 6,6 Volt
3 9,9 Volt
4 13,2 Volt
16,5 Volt16,5
5
Volt
6 19,8 Volt