ROBBE Power Peak QUAD EQ-BID Manual Del Usaurio página 41

+/-
Button
+/-
Button
+/-
Button
'ENTER'-
Button
8.2 PROGRAMMING chIP/KEy (ExAMPLE: PROGRAMMING ThE DATE)
The programming procedure is started in this screen display after you press the 'ENTER'
for setting the parameters in manual mode (see Chapter 7.3). To help you keep track of
the data, a date can be entered instead of the audible beeper. The date is entered in the
format 'YYYY-MM-DD'.
Press the 'ENTER' button to start entering the date. In addition to the '+' and '-' symbols
at the right-hand end of the top line you will see the year number flashing; you can now
Operating Instructions
Power Peak ® Quad EQ-BID
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button
button to activate the programming loop.
You can now enter all the parameters using exactly
the same procedure and sequence as described
update it using the '+' or '-' button. Pressing the
'ENTER' button once more causes the month num-
ber to flash, and this can now be changed using the
'+' / '-' buttons. The current day's date can then be
set in the same way. When the date is correct, press
the 'ENTER' button again to store the information.
+/-
Button
+/-
Button
+/-
Button
17
Order No.
8565
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button