Before You Begin - Medela Harmony Instrucciones

Before You Begin

Before using your Harmony
The Harmony sanitized version does not require washing before
first use.
Disassemble parts – refer to diagram on page 3 and
photos on page 5-6. Sanitize in boiling water for 10 minutes.
Prior to each use:
Disassemble the PersonalFit
membrane and bottle.
All parts are to be disassembled and washed separately for the
pump to function efficiently.
Under normal use, the pump handle (A) and diaphragm/
stem (B) only need to be cleaned periodically or when it is
apparent they have become soiled. Hint: Do not remove small
white o-ring from stem.
Wash remaining parts in dishwasher or in soapy water and
rinse well. Air dry parts on clean towel and cover when
not in use.
Do not use with Quick Clean
according to the instructions above.
Hygiene:
Wash hands thoroughly before pumping. If your physician
recommends it, clean breast and surrounding area with a
damp cloth. Do not use soap or alcohol, which can dry the
skin and cause cracked nipples.
Using a breastpump should never be uncomfortable. If you
experience any pain, contact your healthcare provider or
lactation specialist immediately.
Single User Caution:
The Harmony breastpump is a personal care item that should
not be shared between users.
4
for the first time:
™
breastshield, pump body, valve,
™
Micro-Steam bags. Wash only
™ ™
Harmony Disassembly
™
1. R emove the PersonalFit
breastshield (C) from the
pump body (D).
2. R emove the pump handle
assembly (A-B) from the
pump body (D). Check to
see if it needs cleaning.
3. H old the pump body (D) and
unscrew from the bottle (G).
4. P ull yellow valve (F)
from pump body (D)
by twisting gently.
™
5