GreenWorks GPW 2001 Manual De Instrucciones página 12

ASSEMBLY
OPERATING THE HANDLE ASSEMBLY
‡ Open for use: Lift up on the handle bar pivoting it towards the back into an upright position
until it clicks and locks into place.
‡ To fold the handle, pull the latch sideways, and push the handle down and forward.
OPEN
CLOSE
ASSEMBLING THE SPRAY WAND (
‡ Push the end of the spray wand into the trigger handle and rotate clockwise to secure.
‡ Pull on the spray wand to be certain it is properly secured.
(See Figure 3.)
See Figure 4.)
12
Fig. 3
Fig. 4