GreenWorks GPW 2001 Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY
CONNECTING THE GARDEN HOSE
C A U T I O N :
Always observe all local regulations when connecting hoses to the water main. Some areas have
restrictions against connecting directly to public drinking water supply to prevent the feedback of
preventer is usually permitted.
Uncoil the garden hose.
NOTE: There must be a minimum of 10 feet of unrestricted garden hose between the water intake and the
garden hose faucet or shut off valve (such as a "Y" shut off connector).
‡ Run water through the garden hose with motor in OFF position until a steady stream of water
appears.
‡ Inspect the screen in the water intake.
‡ If the screen is damaged, do not use the machine until the screen has been replaced.
‡ If the screen is dirt y , clean it before connecting the garden hose to the machine.
With the hose faucet turned completely off, attach the end of the garden hose to the water
intake. Tighten by hand only.
(See Figure 6.)
B
A
14
Fig. 6
A- Garden hose
B-Water intake

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido