GreenWorks GPW 2001 Manual De Instrucciones página 25

TROUBLESHOOTING
PROBLEM
Output pressure varies
high and low. (contin-
ued)
Detergent is not coming
out.
Garden hose connection
leaks.
Spray wand, extension,
or nozzle leaks.
Pump is noisy
Water leaks from pump
(up to 10 drops per min-
ute is permissible).
Oil is dripping
POSSIBLE CAUSE
Discharge nozzle is ob-
structed.
nozzle.
Is detergent tank seletor on
and the correct tank slected?
Detergent bottle or suction
tube not properly connected.
Detergent is too thick.
Filter on detergent suction
tube is clogged.
Damaged or clogged deter-
gent suction tube.
Nozzle is in high-pressure
position.
Discharge nozzle is ob-
structed.
Missing/worn rubber washer.
Broken o-ring or plastic insert.
Pump is sucking air
Water seals are damaged or
worn.
Oil seals are damaged or
worn.
25
SOLUTION
Blow out or remove debris with a
Run distilled vinegar through
detergent tank.
Select the correct tank, either A
or B.
Check connections.
Dilute detergent.
remove build-up.
Remove obstruction or replace
detergent suction tube.
Turn nozzle tip to low-pressure
position.
Blow out or remove debris with a
Insert new washer.
Call the Toll-Free Hotline.
airtight. Turn off machine and
purge pump by squeezing trigger
emerges through the nozzle.
warm water.
Call the Toll-Free Hotline
Call the Toll-Free Hotline