Park Tool PCS-12 Guia De Inicio Rapido

Park Tool Co. 6 Long Lake Rd. St. Paul, MN 55115 (USA) www.parktool.com
Thank you for purchasing a PCS-12 Bench Mount Repair
Stand. Park Tool Repair Stands are the number one choice
of shop, team, and home mechanics everywhere. Built from
the finest materials, we are confident your new stand will
provide many years of reliable service.
Assembly:
1. Press composite top tube (#1458) onto bench mount
weldment (#1794) and tighten bolts.
2. Place clamp (#1795W) and tapered cone (#1800) into
top tube assembly. Thread swing handle (#1793)
clockwise into clamp until firmly engaged.
Notes:
To avoid damaging finish, always clean part of bike being clamped.
Carbon fiber and very thin-walled frame tubing should not be
clamped. For these bikes, the seat post should be clamped.
PCS-12 part numbers
Part No. Description
107-2 clevis pin c-clip
1184 jaw e-clip
1185K jaw cover set
1458 composite top tube only
1458-12 complete top tube assembly
1793 composite top tube swing handle
1794 bench mount
1795W complete clamp
1800 tapered compression cone
1801W rotating jaw
1802W moveable jawl
1795W
Home Mechanic Bench
Mount Repair Stand PCS-12
Part No. Description
1803 hex barrel - rotating jaw (threaded center hole)
1804 hex barrel - moveable jaw (unthreaded center hole)
1805-4 cap screw
1806 spring
1807 clevis pin
1808 step bushing
1809 nylon washer
1810 clamp screw
1811 cam lever
1812 cam lever bolt
1813 cam lever nut
1458-12
1458
1794
• Quick adjusting, cam-type clamp
• Fits tubes from 24mm to 76mm (7/8" to 3")
• Clamp rotates 360 degrees
• Fully adjustable clamping pressure
• Durable powder coat finish
Clamp Operation:
1. To clamp bike, turn cam lever (#1811) clockwise
while in the closed position. Do not over-tighten.
2. To release bike, lift cam lever.
Make sure brake and shift cables are in the jaw recesses
before closing clamp.
To keep clamp operating smoothly, occasionally grease the threads
and apply a small drop of oil to all pivot points. Do not lubricate
inside the top tube assembly.
1807
1185K 1804
1793
1805-4
1803
© 2009 Park Tool Co. / ® The color BLUE is a registered trademark and trade dress of Park Tool Co.
1812
1811
1802W
1810
1809 nylon
1808
107-2
1806
1801W
1184
1813
1800