Kohler K-682 Guia De Instalacion página 10

Wall 1
Wall 2
5. Custom Component Configurations
Draw in the components for your custom shower.
Draw lines from the valve to each component. Be aware that:
• Outlet 1 is always recommended to be the primary showerhead.
• The installer must determine the desired sequence for Single mode and plumb the ports to the
bodysprays accordingly.
• Custom mode will allow the user to select a different water outlet as the primary showerhead, but it
is not recommended.
• In Custom mode, the bodysprays will cycle up the solenoid bank regardless of which port is the
primary outlet.
1043183-2-B
Ceiling
Wall 3
Floor
10
Wall 2
Wall 1
Floor
Kohler Co.