Kohler K-682 Guia De Instalacion página 7

Ceiling
Wall 1
Wall 2
Floor
2. Component Configurations
NOTE: Preprogrammed component configurations are shown; other options are possible. Use of
configurations other than the preprogrammed options will LIMIT the preprogrammed massage functions.
Massage functions that correspond with custom configurations can be programmed. Refer to the
"Digital Interface Homeowners Guide."
The bodyspray to valve outlet ratio must be equal for all bodysprays installed. All bodysprays must
have equal flow rates; unequal flow rates will cause the massage mode to shut down. See examples
below:
Correct: For an example with four installed bodysprays; one bodyspray to one valve outlet (1:1) using four
valve outlets (Envelop).
Incorrect: For an example with four installed bodysprays; two bodysprays each installed to one valve outlet
(1:1) and the other two bodysprays installed to one valve outlet (2:1).
Kohler Co.
Frontage
1
2 2
3 4
6 5
Unwind
*
2
1 3
4
5
6
Downpour
3 3
*
2
1
4
5
6
Wall 3
Wall 1
Floor
If bodysprays, watertiles or watertile
*
showerheads are present in these outlets,
Wall 2
they will not cycle.
7
Envelop
1 2
3 4
6 5
Linear
3
2 1 2
4
5
6
Surround
*
*
2
3
1
4
5
6
1043183-2-B