Safety; Intended Use - Johnson Controls VARTA VSSP 2.0 Manual De Instrucciones

SAFETY

The VSSP 2.0 has been manufactured in accordance with
generally accepted engineering practice. Nevertheless
danger of personal injury and material damage exists if
you do not comply with the instructions in this chapter
and in this operating manual.
Read this operating manual thoroughly all the way
through, before working with the VSSP 2.0.
Keep the operating manual on hand so that
it is accessible for all users at anytime.
Always ensure that the operating manual is provided
with the VSSP 2.0, when the device is provided to third
parties.

INTENDED USE

The VSSP 2.0 is a diagnostics device for vehicle batteries
that must only be used for the following purposes:
Checking of state of charge and state of health of start-
stop batteries and conventional batteries installed
in vehicles
Checking of state of charge and state of health of brand
new start-stop batteries and conventional batteries that
are not installed in vehicles
Checking of state of charge and state of health of used
start-stop batteries and conventional batteries that are
not installed in vehicles
Testing of relevant control devices for start-stop
systems
Testing of the starter and the alternator of vehicles with
start-stop systems
Reading out and deleting error codes in the relevant
control devices of start-stop systems
Menu-based user guidance through the removal
and installation process of start-stop batteries
Safety
VSSP 2.0 5
DE
EN
FR
ES
IT