Checking The Installed Battery In The Vehicle - Johnson Controls VARTA VSSP 2.0 Manual De Instrucciones

CHECKING THE INSTALLED BATTERY IN
THE VEHICLE
With the module Check Start-Stop System you can
check the battery installed in the vehicle and the relevant
control units of the vehicle and replace the battery if
required.
The program guides you through the diagnosis, as well
as removal and installation of the battery, step-by-step.
NOTE
With this module, in addition to start-stop batteries, you
can also test conventional batteries in the vehicle.
Switch on the VSSP 2.0 and log in as user (see Switching
on and logging in on page 22).
The module overview is displayed.
Check Start-Stop System
Check Used Battery
In the module overview, tap on the module Check
Start-Stop System.
Operation
Check New Battery
Configuration
75% de
VSSP 2.0
DE
EN
FR
ES
15:16
IT
25