Johnson Controls VARTA VSSP 2.0 Manual De Instrucciones página 109

The diagnosis will be executed. This can take a few
seconds.
The results of the diagnosis will be displayed in the
Report screen.
Report
Battery check
The result of the battery test is displayed in the Battery
check row:
OK: The battery is in order.
Recharge: The battery must be recharged.
Replace: The battery is used up and must be replaced.
In addition the following information is displayed:
OCV ( Open Circuit Voltage): This value shows open
circuit voltage of the battery.
SOC ( State of Charge): This value shows the charge
state of the battery in percent.
SOH ( State of Health): This value shows the state of
health of the battery in percent.
Tap on the OK button.
The check of the battery is concluded and the module
overview of the VSSP 2.0 is displayed.
Disconnect the alligator clamp from the battery.
Replace
OCV 12,72 V
SOC 65%
SOH 22%
Operation
75% de 15:16
VSSP 2.0 47
DE
EN
FR
ES
IT