Maintenance Manual; Handling - Maschio ATTILA HYDRO 250/5 Empleo Y Mantenimiento

ATTENTION
Do not remove, tamper with or render illegible the machine's
CE mark.
ATTENTION
Refer to the data contained on the machine's "CE" mark for
all contact with the manufacturer (e.g.: for requesting spare
parts etc.)
ATTENTION
When the machine itself is demolished, the CE mark must be
destoyed.
ATTENTION
If the marking gets lost, the owner must request a copy from
the Manufacturer.

1.4.1 MAINTENANCE MANUAL

The manual must be kept in perfect condition for the entire life of
the machine, right up to the time when it is demolished (see chapter
5 DEMOLITION AND DISPOSAL).
In the event of transfer, sale, hire, licence to use or leasing of the
equipment, the present manual must accompagny it at all times.
cod. F07011061
USE AND MAINTENANCE

1.5 HANDLING

If the machine is handled, it must be lifted by hooking onto the
appropriate holes with a suitable winch or crane of suffi cient ca-
pacity. Due to the dangerousness of this operation, it should only
be performed by skilled and expert personnel.The mass of the
machine is on the identifi cation Plate (5 Fig. 1).
The hook points can be detected by fi nding the «hook» symbol
(8 Fig. 2).
The machine's handling operations should be carried out by
one operator only.
The operator must ensure that there are no third parties near
the machine or in the area in which manoeuvres are being
carried out.
If the machine is lifted using a block and tackle or similar
equipment, do not stand underneath the suspended load.
Lift the machine, keeping it as near the ground as possible.
When lifting the machine, use only the hooking points indi-
cated in this manual.
Working overalls, safety footwear and safety gloves must be
worn.
ENGLISH
ATTENTION
ATTENTION
ATTENTION
ATTENTION
ATTENTION
ATTENTION
27