Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
1. Use the specified accessories and attachments.
• Do not use accessories or attachments other than those specified in the instruction manual or in
our catalogues. Accidents or injuries could happen.
2. Keep the workplace clean.
• Ensure that the workplace is clean and there are no slippery surfaces, such as caused by oil.
3. Do not allow unauthorised personnel near the machine.
• Do not allow unauthorised personnel to operate the machine.
• Do not allow unauthorised personnel to enter the workplace, especially children. Injuries could
occur.
4. Do not use the machine with force.
• Only use the machine for the designated purpose. Work according to the capacity of the main
unit in order to guarantee safe and efficient operation. Excessive force could not only damage the
product but also cause accidents.
5. Wear close-fitting clothing.
• Do not wear ties, garments with open sleeves, loose garments, accessories such as necklaces, etc.,
which could get caught in rotating parts.
• When working outside it is recommended to use rubber gloves and shoes with studs. Slippery
gloves and footwear can lead to injuries.
• Cover long hair with a cap or net to prevent it from becoming caught in rotating parts.
• Wear a safety helmet, safety footwear, etc. in accordance with the working environment.
6. Do not work in an unnatural posture.
• Keep a firm footing and balance to avoid falling and injury.
7. Operate the machine with extreme care.
• Always work by paying great attention to the handling of the machine, the working methods and
the surrounding conditions. Carelessness could result in accidents and injury.
• Do not work with the machine if you have low concentration levels such as when you are tired,
after consuming alcohol, whilst ill, under the effects of medication, etc.
8. Carry out maintenance on a daily basis.
• Follow the instruction manual when changing accessories and parts.
• Keep parts used for gripping dry and clean and free from oil and grease. If they are slippery injuries
could happen.
9. Check that there are no damaged parts.
• Before using the machine, carefully check for damage to the parts.
• Check that there are no anomalies in the adjustment of movable parts, tightening, damaged parts
and other parts which affect operation.
10. For general maintenance and repairs call an authorised distributor.
• Bear in mind that for any repair you must contact the distributor or our sales division. If repairs
are carried out by unqualified or unskilled personnel, the operation of the machine will be
compromised, which could lead to accidents or injury.
11. Always work with sufficient light.
• This could otherwise lead to accidents or injury.
11
11

SAFETY

WARNING
!
ENGLISH
ESPAÑOL

Publicidad

Tabla de contenido
loading

Tabla de contenido