Section Xiii - Electromagnetic Conformity Declaration - Tyco KENDALL GENIUS 2 Manual De Operación Y Servicio

Status: Approved Doc#: AW10001726 Effective Date: nulldate

Section XIII - Electromagnetic Conformity Declaration

The Genius 2 Checker/Calibrator has been built and tested according to IEC/EN61010-1 and EN61326-1 standards
The Checker/Calibrator is intended for use in the electromagnetic environment specified below. The user of the equipment should
assure that it is used in such an environment.
Emissions Test
Conducted and Radiated
Emissions (EN61326-1)
Harmonic Current
(EN61000-3-2)
Voltage Fluctuation and Flicker
(EN61000-3-3)
Radiated Disturbance Immunity
(EN61000-4-3)
Conducted Disturbance
Immunity (EN61000-4-6)
Power Frequency Magnetic Field
Immunity (EN61000-4-8)
Voltage Dips and Interrupts
Immunity (EN61000-4-11)
Electrical Fast Transient/Bursts
Immunity (EN61000-4-4)
Surge Immunity (EN61000-4-5)
Electrostatic Discharge
(EN61000-4-2)
GENIUS ™ 2
Checker / Calibrator
Compliance Electromagnetic Environment -Guidance
Group 1, Class B The Checker / Calibrator emissions are very low and are not likely
to cause interference in nearby electronic equipment.
Class A
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Meets Criteria C,
Non-Continuous
12
10/23/2008 Artwork#s: WN 182563-01 Job#: 16245
Operation and Service Manual