Publicidad
Idiomas disponibles
Idiomas disponibles
Page 8
SB-2-055-F
The following hazards may occur
during the normal use of this
equipment. Please read the following
warnings
before
using
equipment.
H Z RD: FIRE
C USE: Solvent and coatings can be
highly
flammable
or
especially when sprayed.
S FEGU RDS: dequate exhaust must be
provided to keep air free of accumulations
of flammable vapors.
Smoking must never be allowed in the
spray area.
Fire extinguishing equipment must be
present in the spray area.
H Z RD: SOLVENT SPR Y
this
C USE: During use and while cleaning and
flushing,
expelled from fluid and air passages.
Some solvents can cause eye injury.
S FEGU RDS: Wear eye protection.
combustible
H Z RD: INH LING TOXIC SUBST NCES
C USE: Certain materials may be harmful
if inhaled, or if there is contact with the
skin.
S FEGU RDS: Follow the requirements of
the Material Safety Data Sheet supplied by
your coating material manufacturer.
dequate exhaust must be provided to
solvents
can
be
forcefully
keep the air free of accumulations of toxic
materials.
Use a mask or respirator whenever there is
a chance of inhaling sprayed materials.
The mask must be compatible with the
material
being
sprayed
concentration. Equipment must be as
prescribed by an industrial hygienist or
safety expert, and be NIOSH approved.
H Z RD: EXPLOSION H Z RD –
INCOMP TIBLE M TERI LS
C USE: Halogenated hydrocarbon solvents
– for example;
methylene chloride and
1,1,1, – Trichloroethane are not chemically
compatible with the aluminum that might
be used in many system components. The
chemical
reaction
caused
solvents reacting with aluminum can
become violent and lead to an equipment
explosion.
S FEGU RDS: Guns with stainless steel
internal passageways may be used with
and
its
by
these
Publicidad
