DeVilbiss DAGR Manual De Instrucciones Y Mantenimiento

AirBruSh inStructionS And MAintenAnce
thank you for purchasing your deVilbiss
dAGr airbrush! You will find that this high
®
quality, versatile airbrush gives the demanding
professional artist the full
performance—from spraying fine lines to wide
backgrounds—with a wide
materials—from solvent-based automotive
paints to waterbase inks.
DAGR airbrushes are precision made with
micro machining and high quality materials.
Each airbrush is spray tested before being
packaged in its collector's tin, assuring that it
meets the tough quality standards you have
come to expect from DeVilbiss. With proper
care, your DAGR airbrush will provide you
with excellent performance to express your
creativity.
by
SPeciFicAtionS
operating Pressures:
20 to 50 psi
range of
Maximum inlet Pressure:
range of
175 psi
Airbrush Plating:
Nickel, copper, chrome
needle Packing:
PTFE (solvent-proof)
Waterborne compatible
Get reAdY to SPrAY
SAFetY FirSt
Please read all safety information on pages
8 and 9.
Service Bulletin
SB-2-056
Replaces SB-2-056
connect to compressed Air
Connect your DAGR airbrush to a regulated
air line or select an appropriate compressor.
The DeVilbiss Airblade
®
compressor is a compact, economical choice
for the beginner and
approximately 25-30 psi of air pressure to the
DAGR airbrush. At 35-40 psi, the DAGR will
produce a high paint flow for shadow, fade,
and background spray, as well as for detail
work and fine lines.
Assemble Airbrush to compressor
Connect the air hose to the compressor and
airbrush, then turn on the compressor. If using
an Airblade compressor, adjust the pressure
®
to between 20 and 30 psi. Listen for any air
leaks in the compressor or air hose fittings.
single piston
will provide