Before Initial Use - Silvercrest SNM 700 A1 Manual De Instrucciones

The device should only be used when it is fully assembled, undamaged, and
in working order!
Make sure that the maximum fi ll level (marked on the shakers) is not exceeded!
Make sure that the device remains stable during operation.
Do not drop the device or allow it to be knocked violently.
Do not expose the device to extreme temperatures, wide temperature varia-
tions, moisture or direct sunlight.
The device may not be moved or transported while it is switched on. Always
pull the mains plug out of the socket and allow the motor to come to a complete
standstill before you move the device.
Do not use the device for longer than 1 minute without interruption to prevent
overheating. Then let the device cool down for a short while before you use it
again.
The motor unit and the blade attachments are not suitable for being cleaned
in the dishwasher!
For Your Health
The device may contain production residues. To avoid harmful effects to your
health, clean the device and all accessories thoroughly before using them for
the fi rst time (see the "Cleaning and Storage" chapter).
Clean the device and all accessories immediately after each use to prevent
germ formation. Do not allow any food residues to dry on.

Before Initial Use

CAUTION!
Beware of danger of suffocation! Keep children and animals away from the
packaging material.
1. Unpack all parts and check the items supplied to make sure they are complete (see the
"Overview" chapter); also check for transport damage. If you fi nd any damage to the
components, do not use them (!), but contact our customer service department.
2. Remove any protective fi lms and stickers that may be present from the device.
3. Clean the accessories before you fi rst use them as they may have possible production
residues on them. Follow the instructions in the "Cleaning and Storage" chapter to do
this.
4. Familiarise yourself with the accessories. Please read the following chapter to do this.
39