AGA marvel MP42SS2 Instrucciones De Instalación página 26

Installation
10a
Place unit within 3" (7.6 cm) of being fl ush with cabinets.
Note: To avoid cabinet damage, place cardboard
between cabinets and unit. When moving unit,
DO NOT crimp, kink or crush water supply line.
11
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
13
Connect supply tube to water valve using
a 1/2" wrench. Note: DO NOT overtighten.
10b
Carefully move unit until semi fl ush with cabinet
(depending on unit).
12
Flush water line by running two quarts of water
into a bucket. Turn water off.
14
Turn on water supply and check for leaks.
26 26