Virutex PEB150 Manual De Instrucciones página 9

PEB150/PEB50 HOT MELT MANUAL EDGEBANDER
Read these OPERATING INSTRUCTIONS and the attached GENERAL SAFETY INSTRUCTIONS
LEAFLET carefully before using the machine. Make sure you have understood them before
operating the machine.
Keep both sets of instructions for future reference.
1. SAFETY GUIDELINES FOR THIS MACHINE
Not following the safety guidelines may result in serious personal injury.
• Do not touch any moving parts.
• Take care as the machine can get very hot.
• Do not touch hot components.
• Hold the machine with both hands during use.
• Do not lean over the machine when it is hot.
• Make sure there is always enough cable, and do not obstruct the cable when operating the machine.
• Check the power cable before starting the machine.
• Do not repair the machine or carry out maintenance work when it is hot.
• Never use the machine close to inflammable or explosive materials.
• Do not work in damp places or in the rain.
• The machine gives off steam.
• Always work in well-ventilated places. Use a face mask if the glue manufacturer so indicates.
• It is essential to read and comply with all the safety measures stated by the manufacturer of the glue that
you are going to use.
• Make sure that the machine has completely cooled down before storing it in its expanded polystyrene
packaging.
E N G L I S H
9