Iso Mount Radio Provision With Pocket - Metra 99-5815 Instrucciones De Instalación

ISO MOUNT RADIO PROVISION WITH POCKET

NOTE: Refer also to the instructions included with the aftermarket radio.
(
1 a) For the Ford Edge/Expedition
2007, Explorer 2006-07, Fusion
2006-07, Mustang 2007 and the
Super Duty 2008 attach the includ-
ed spacers to the back of the radio
housing mounting tabs. (Figure 1A)
NOTE: Use the screws supplied with this
kit to mount the radio housing in the
vehicles that require the spacers.
(b) For the Ford Freestar 2004-07,
Monterey 2004-07, Focus 2005-07,
and the F Series Super Duty 2005-
07, slide the included brackets onto
the sides of the radio housings pocket
from the back of the housing forward.
(Figure 1B)
If your vehicle is not listed above
move to step 2.
2 Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure A)
3
Slide the head unit into the radio
opening until the side clips engage
(Figure B)
4
Snap the Trim Plate into the Radio
Housing. (Figure B)
Continue to final assembly
99-5815 KIT ASSEMBL Y
16
1A
1B
A
B