Double Din Radio Provision - Metra 99-5815 Instrucciones De Instalación

DOUBLE DIN RADIO PROVISION

*
Note: Refer also to the instructions included with the aftermarket radio.
1 For the 2007 Ford Edge/Expedition, 2006-07 Explorer/Fusion/Mercury
Milan, 2004-07 F-150, 2005-07 Five Hundred/Freestyle/Mustang/
Mercury Montego, 2005-07 Lincoln Mark LT and the 2008 Super Duty,
cut and remove the rear mounting tabs from the Double DIN Brackets
a. If your vehicle is not listed above move to step 2.
For the 2007 Ford Edge/Expedition,
2006-07 Explorer, 2006-07 Fusion,
2007 Mustang and the 2008 Super
Duty attach the included spacers to
the back of the radio housing mount-
ing tabs.
a. If your vehicle is not listed above
move to step 3. (Figure A)
NOTE: Use the screws supplied with this kit to mount the radio housing in the vehicles that
require the spacers.
Attach the double DIN brackets to the radio housing. Note: The notch in the housing
3
should be on top. (Figure 3A,3B)
3A
4 Slide the Double DIN radio into the
radio housing/bracket assembly and
secure the radio to the assembly using
the screws supplied with the radio.
(Figure C)
Continue to kit assembly.
99-5815 KIT ASSEMBL Y
3B
17
A
C