Metra 99-5722 Instrucciones De Instalación página 3

9. Remove the (4) 9/32" screws securing
the shifter trim panel, and then slide it
backwards. (Figure F)
Note: There is no need to remove this
panel completely.
10. Remove the (4) 9/32" screws securing
the ashtray assembly, and then unclip
and remove. (Figure G)
DASH DISASSEMBLY
(Figure F)
(Figure G)
(CONT.)
11. Remove the (10) 9/32" screws securing
the radio/climate control panel, and
then unclip and remove. (Figure H)
12. Remove the (4) 9/32" screws securing
the display screen, and then remove.
(Figure I)
13. Remove the (4) 9/32" screws securing
the radio chassis, and then remove.
(Figure I)
Continue to Kit Preparation
(Figure H)
(Figure I)
REV. 10/27/2020 INST99-5722
3